So, you’ve noticed that your heavy equipment is not functioning at full capacity. What do you do? The obvious answer would be to call a mobile heavy equipment repair technician in Sydney. When your technician arrives on-site, there are certain steps that he or she will take to assess, verify and fix the problem. Heavy machinery requires proper maintenance, operation and cleaning in order to function properly. Without this, your equipment will most likely need repairing in its lifetime.

After you’ve repaired your heavy equipment, it is pertinent that you take certain steps to ensure that history doesn't repeat itself. These steps will depend on a few factors:

• Type of problem

• Whether it was caused by a manufacturer or human error

• Personal or company fault

• Reparable or irreparable damage to the equipment

3 actions your mobile heavy equipment repair technician will take on-site

1. Troubleshoot

A technician will first establish what the underlying issue is. This will involve troubleshooting the heavy equipment until he has narrowed down the cause of the malfunction. This process may take hours, especially since every brand and type of machine is different and will most likely be unfamiliar to the technician. 

It is important that heavy equipment breakdowns are not left unattended, even if they may take hours to fix. Without attending to them, you can lose more time on your project and endanger employees.

2. Verification and investigation of the issue

After the technician has troubleshot, he will then assess the indications of the underlying problem. This involves speaking with the person who operated the machinery and initially discovered the issue. They will discuss how he first found the issue, what he was doing when he found it and any other conditions that may be deemed relevant. Asking these questions will give the technician a better idea of what is wrong with the equipment.

3. Fixing the problem

 After your technician feels fully confident that he has identified the issue/issue, he will call a team to rectify the problem. This may involve repairing or replacing key parts of the heavy machinery or replacing it entirely. If you are given the choice between fake and branded parts, always choose branded. After all, you want to avoid this problem from happening in the future. 

What should you do?

Your technician will inform you of the issue and what its possible causes were. If it was a manufacturer’s issue, then there is little you can do to avoid it. However, if it was human error, then you should advise your team depending on the specific cause. Some preventative measures you can inform them of are:

• Do not exceed the maximum capacity of the heavy machinery

• Ensure that the heavy machinery is used according to its manual

• Ensure that lubricant levels are monitored

• Properly clean the machine

Do you need a repair technician for your heavy equipment? There are several companies in Sydney who will be able to help ensure your equipment is functioning perfectly.